五桂山旧地面翻新告诉您基面含水量高的解决方式
基面含水量较高的解决方法是根据不同的基面含水量程度，以及详细的产品机能来决定的。一般会分为一下几类：

专业基面防水层：

这类产品一般来说应用于含水量比较高的基面，通过涂装一层防渗透渗出涂层来达到防水效果。合用于含水量不断上升的基面。这种防渗透渗生产品主要是在树脂地坪系统完成后，用来防止水位升高引起的渗水现象进行的保护手段。

防潮层

这类产品是通过与地面基层连接形成一个防潮层，防止地下水向地面渗漏。因为此法对于树脂防水补漏系统具有长远的保护作用，所以被广泛使用。

防潮底涂层

良多出产商都研发出了针对含水量绵阳兴发防水补漏公司高的基面题目的专业防潮底涂产品。此法同样对于防水补漏系统具有长远的保护作用，合用范围也较广。

尺度底涂层

在一些特殊情况下，根据基地含水量程度，我们在涂装尺度树脂地坪系统时，需要涂装尺度底涂层。详细的留意事项和操纵方式需要按照出产商的指导仿单进行。

透湿系统

弥补了底涂层和树脂防水补漏面涂层无法达到的防潮性，目前良多出产商都已开发出透湿系统。透湿系统是为了保证材料的水蒸气透过率，也合用于无法装备防水层的基面。总的来说，我们建议在涂装前与出产商进行联系，采取准确的防水层方案，方可避免日后地坪系统泛起题目甚至失效。

Base level of high moisture content solution is according to the different degree of base level of the moisture content, as well as the detailed product function. Generally divided into several categories:
Professional base waterproof layer:
Such products are generally used in water content higher base level, by coating a layer of anti seepage seepage coating to achieve waterproof effect. Used for water content rising base level. The penetration seepage prevention raw products mainly in the resin floor system is completed, to prevent water seepage phenomenon caused by the rising waters for protection.
Moistureproof layer
This kind of product is to pass at the grass-roots level with the ground connection form a moistureproof layer, prevent the leakage of groundwater to the ground. Because this method for resin floor system has a long-term protection, so widely used.
Dampproof bottom coating
A lot yield are developed for high water content of the base level of subject specialty dampproof bottom coating products. The method for the same resin floor system has a long-term protection, share scope is wide.
The bottom of the scale coating
Degree of water content in some special cases, according to the base, we in coating resin floor system, the need to painting the bottom of the scale coating. Detailed attention to matters and manipulation ways need to be carried out in accordance with the produce business guidance FangChan.
Moisture permeability system
Make up the bottom coating and resin floor coating cannot reach moisture resistance, at present a lot of produce are moisture vapor transmission system has been developed. Moisture permeable system is to ensure the water vapor transmittance of the material, is applicable to equipment base level of the waterproof layer. In general, we recommend that before coating and produce business contact, take accurate waterproof plan, can avoid floor system in the future on the subject and even failure.

http://www.jyd456.com/dajiang/04e9-19.htm